GEKA Prosaw



Throat Capacity



850KN / 85Tn  

Punching Power

Geka Bendicrop 85SD Steelworker Steelworker


Geka's exclusive BENDICROP 85SD steelworker is a dual cylinder machine with 6 work stations.

In addition to the cutting, punching and notching stations it has a PERMANENT BENDING STATION with a capacity of up to 200mm x 15mm.

It is also fitted with a system to reduce deformation when shearing flat bars. This machine benefits from a deep throat of 500mm and a punching power of 85 tons.

The Bendicrop-85 SD steelworker machine has TWO BIG ADVANTAGES over the other machines:

  • Permanent bending station inside CE regulation 
  • Shearing system with minimum distortion of flats 


  • Accessories mounted on the machine as standard included on basic price:
  • Standard punching attachment: Punch holder; Punch clamp sleeve; Quick change nut; Punching stripper; Table for punch; Set of punches and dies.
  • Hydraulic hold-down, movable and fixed blades for cutting angles, round and square bars 
  • Top and bottom blade for cutting flat bars, with the anti-distortion system. This station is provided with a guided table for flats to guide the material from 45º to 90º 
  • Triangular notching equipment with the notching rectified table provided with a scaled rule 
  • Bending equipment with two dies (V of 50 and 90mm).
  • Two different speeds to cover the CE regulation with the bending station.
  • Universal electric automatic bar stop 1m.
  • Set of tooling for the maintenance of the machine.
  • Instructions manual in the customer’s language.
  • CE certified.



  • Set of round punch type 8/31 and die type 5 from Ø3mm up to Ø31mm 
  • Set of round punch type 8/40 and die type 8 from Ø32mm up to Ø40mm 
  • Oversize punching unit up to Ø100mm
  • Fix plate oversize punching table up to Ø100mm 
  • Rectangular notching unit 
  • Table for rectangular notching unit 
  • Tube notching unit (Maximum tube 2”) 
  • Unit for cutting profiles U, I or T profiles 

For more information about the Geka Bendicrop 85SD steelworker please contact our steelworker specialists on 01536 410999.


Machine Type Steelworkers
Manufacturer Geka
Materials Solids, Sections, Ferrous, Non-Ferrous,
Other Details
Weight 2500kg
Motor 9kw
Flat Bar Shear 450 x 15mm  
Rectangular Notching
Punching 40 x 15mm   24 x 24mm
Angle Shear at 90 120 x 120 x 10mm
Angle Shear at 45
Bending 200mm x 12mm
Solid Bar 45mm & 40mm
Angle shearing power with standard blade (Without deformation)
Angle with optional blade (small deformation)
Punching Power 850KN / 85Tn
Angle Shear Tonnage
Triangular Notching 130 x 130 x 12mm
Throat Depth 500mm

Please note: All the information about machines listed on this website is subject to change and should not be relied upon without verification from our sales staff.

Geka Bendicrop 85SD Steelworker

Contact Us

Call us during office hours (8:30am - 5pm, Mon - Fri) for assistance with choosing the best machine for the job.