Where production requires twin operator machines, higher speeds or greater capacity, GEKA provides the solution with the HYDRACROP range with five work stations:
Punching
Shear of flatbars
Section shearing
ΓΈ and shearing notching
HYDRACROP models available from 55 to 220 metric tons on the punching end and 110 to 300 metric tons on L-shearing end.
Geka Bendicrop 85SD Steelworker
Twin cylinder 85 ton punching machine with 5 work stations.
New Machine
Geka's exclusive BENDICROP 85SD is a dual cylinder machine with 5 work stations.
In addition to the cutting, punching and notching stations it has a PERMANENT BENDING STATION with a capacity of up to 200mm x 15mm.
It is also fitted with a system to reduce deformation when shearing flat bars. This machine benefits from a deep throat of 500mm and a punching power of 85ton.
Notes: Capacities based on a material resistance of 45 kg/mm2 or 65,000 tensile.The manufacturer reserves the right to make modifications without prior notice. The only machine fully produced and manufactured in the EU. All GEKA machines are special order. GEKA is the only steelworker you can customize to fit your needs.
One Cylinder Steelworkers 
shearing notching
